Home / News / News

Choose the CNC Lathe Machine

Jul. 03, 2021

Choose the CNC Lathe Machine

CNC lathe machine suppliers will share this article with you.

Choosing the right CNC lathe is a difficult task. There are quite a few factors you need to consider, such as the quality of the clamps, because they keep the workpiece stable. You also need to check the tolerance level of the CNC lathe, because it will go through a lot of rough operations. In addition, when it comes to choosing the right CNC lathe, you need to check the nature of your output and take accordingly. Last but not least is the budget. Let's take a look at some factors to keep in mind when choosing a CNC lathe:


Weight plays a very important role when choosing a CNC machine tool, because if your machine is on the heavier side, then it clearly shows that it will withstand severe vibration and other operations that affect the efficiency of CNC lathes. Don't go for a lightweight CNC lathe, because it can get the balance very easily and affect your output results. If possible, choose cast iron.

Swing and bed measurement

The swing measurement is the largest diameter of any material that can be cut or processed on a lathe. The measurement is from the bed of the lathe to the center of the spindle. A bed measurement is to determine the maximum length of the workpiece by knowing the distance between the centers. This measurement will help you know which CNC lathe is looking for based on the output you want.

CNC Lathe

CNC Lathe

Type of stand and tool storage area

The frame is the foundation of the entire CNC lathe. If you will be working on a larger project, then you should be very careful about the overall design of your stand. Since CNC lathes experience a lot of vibration, it is necessary to find a material that can absorb most of the vibration. In addition, it is always better if you have a tool storage box with your lathe. This will increase the weight of the machine, thereby reducing vibration.

Headboard and bed

The bed of any CNC lathe machine is usually made of cast iron, and it is connected to the headstock so that the tool post and tailstock can move parallel to the axis of the main shaft. When buying a CNC lathe, you need to check whether the bed is strong enough, because the entire operation of things depends on the bed. The next important thing to consider when buying your first CNC lathe is the headstock. Always go for a cast iron headstock, because it will give the whole machine a solid rigidity.

Lathe motor and drive

If you choose the right lathe motor for your CNC lathe, it can have a major impact on how the output comes out. If you are just starting, then you should pay special attention to the lathe motor. Always go for a high-quality lathe motor, because this is one thing that can wear out very quickly if you buy a cheap one.

supmc@vip.sina.com 704276900