CWZ Ordinary Lathes
This machine is a universal lathe, suitable for High speed steel and hard alloy cutter to process axial parts, cylinder type and disk parts of different materials
Product Description
Product Description
| MODEL | CWZ61160 | CWZ61180 | CWZ61200 | CWZ61220 | CWZ61240 | CWZ61250 |
| CAPACITY | ||||||
| Max.swing over bed | 1600mm | 1800mm | 2000mm | 2200mm | 2400mm | 2500mm |
| Max.swing over cross slide | 1250mm | 1450mm | 1650mm | 1850mm | 2050mm | 2150mm |
| Center distance | 3M, 4M, 5M, 6M, 8M, 10M, 12M, 16M | |||||
| Max.weight of workpiece | 32T | |||||
| Width of bed | 1600mm | |||||
| HEAD STOCK | ||||||
| Spindle hole | Φ85mm | |||||
| Spindle taper | Φ120mm taper 1:7 | |||||
| Spindle speeds | 3 stage hydraulic pressure stepless speed change（0.8-18）（2.4-54）（7.2-160）r/min | |||||
| GEAR BOX-THREADS&FEEDS | ||||||
| Metric thresds range(pitch) | 2-40mm(Full length thread can be machined for special order) | |||||
| Inch threads range(inch) | 1-14 | |||||
| Worm gear threads range(module) | 1.5-20mm | |||||
| Longitudinal feeds range | 0.125-45mm/ spindle every turn | |||||
| Cross feeds range | 0.063-24mm/ spindle every turn | |||||
| Rapid feed:long/cross | 3000mm/min,1500mm/min | |||||
| TOOL-POST | ||||||
| Tool section | 70*70mm | |||||
| CARRIAGE | ||||||
| Cross slide travel | 725mm | |||||
| Middle slidle travel | 600mm | |||||
| TAILSTOCK | ||||||
| Sleeve diameter | 300mm | |||||
| Sleeve taper | Φ100 taper 1:7 | |||||
| Sleeve traver | Φ300mm | |||||
| MOTOR | ||||||
| Main motor | 80KW（DC） | |||||
| Rapid feed motor | 1.5KW | |||||
| Tailstock motor | 1.5KW | |||||
This machine is a universal lathe, suitable for High speed steel and hard alloy cutter to process axial parts, cylinder type and disk parts of different materials, turning excircle, section, slot, boring holes and inner cone.In addition, it also use upper tool post to turning various threads with the length less than 600mmm by change gear. (special orders can turning total length of screw thread)
Spindle is two supporting structure, driven by DC motor , spindle speed range is 0.8-160r/min with stepless speed regulating.There are 3 rectangular guide ways. The whole bed seems to be a box with high rigidity. Lathe is equipped with a separate pump, forced lubrication, carrige box, the tool post, saddle, tailstock can fast moving. Machine has high rigidity, high efficiency, safe and reliable, convenient operation, etc
